Home > Products > Environmental Test Equipment

Environmental Test Equipment

LSP works closely with Thermal Product Solutions (TPS) to provide quality solutions for Environmental Tests. Brands under TPS include, Tenney, Blue M, Lunaire and TPS-Tianyu.

   
Temperature / Humidity Chamber
ESS / Temperature Cycling Chamber
Altitude Simulation Chamber
Thermal Vacuum Chamber
Walk-In Environmental Room
Programmable Humidity Chamber
Ultra Low Humidity Chamber
Thermal Shock Test Chamber
Solar Panel Test Chamber
Altitude and Vacuum Test Chamber
Industrial Vacuum Oven
Combined Temperature and Vibration Test Chamber
Steady State Humidity Chamber
Continuous High Temperature and High Humidity Chamber
   
Applications:    
Aging
Annealing
Burn-In
Conveyors
Die Attach Cure
Drying
Ink Mark Cure
Optics
Post Mold Cure
Research
Stability
Stress Relief
Thermal Shock
Alternative Fuels
ASTM Tests
Continuous Cure
Curing
Die Coat Cure
Encapsulation Cure
Medical Component Cure
Optoelectronic Cure
Pre-Heat
Shelf Life
Steady State
Temperature/Humidity
Underfill Cure
Altitude
Automotive Component Cure
Controlled Atmosphere
Depyrogenation
Drill Bit Curing
Heat Sink Attach Cure
Mold Cure
Photo Resist
Print Cartridge Cure
Solar Cells
Sterilization
Thermal Cycling
Vacuum

Vivariums
LSP

Temperature / Humidity Chamber
- Temperature range from -70°C to +200°C
- Humidity range from 10% RH to 98% RH
- Available in various internal volume and capacity

LSP

Thermal Shock Test Chamber (Air to Air)
- Available in 2 Zones and 3 Zones configuration
- Available in various internal volume and capacity
- Meets MIL-STD 883 and MIL-STD 202F

LSP

ESS / Temperature Cycling Chamber
- Temperature change rate of 5°C /minute, 10°C /minute, 15°C/minute
- Available in various internal volume and capacity

LSP

Solar Panel Test Chamber
- Meets the following standards
. UL 1703 Sections 35 and 36
. IEC60068 Section 2.78
. IEC61215 Sections 10.11, 10.12 and 10.13
. IEC61646 Sections 10.13
. IEC62108 Sections 10.6, 10.7 and 10.8
. ASTM E1171-04 Sections 6.5, 6.6 and 6.7

LSP

Altitude Simulation Chamber
- Simulates altitudes up to 200,000 feet    
- Temperature range from -70°C to +177°C
- Humidity range from 20% RH to 98%RH
- Available in various internal volume of 5 to 64 cubic feet
- Non-corroding humidity system
- Vertical-down recirculating conditioning stream

LSP

Altitude and Vacuum Test Chamber
- Simulates altitudes up to 40,000 feet
- Temperature range from 0°C to +100°C
- Reinforced viewing window option availabe

LSP

Thermal Vacuum Chamber
- Simulates vacuum of up to 10-7 Torr
- Overall Thermal Capabilities from LN2 Temperature to +150°C
- Available in various internal volume from 2 to 8 cubic feet in diameter.
- Ultra-clean, high-speed vacuum pump
- Full Opening, O-Ring sealed access door

LSP

Industrial Vacuum Oven
- Designed to function at vacuum levels up to 20 mm Hg (80,000 altitude)
- Vacuum capabilities up to 0.169 mm Hg (20,000 altitude) available
- Achieves temperatures from approximately 10°C above ambient to +150°C
- Brine heating system on fully insulated workspace walls
- Available in various internal volume of 8, 18, 27, 64 cubic feet

LSP

Walk-In Environmental Room
- Temperature range from -65°C to +200°C
- Humidity range from 20% RH to 95% RH
- 16 Gauge Stainless Steel floors
- Custom configurations available

LSP

Combined Temperature and Vibration Test Chamber
- Temperature range from -70°C to +150°C
- Humidity range from 20% RH to 98% RH
- Temperature change rate of 5°C/minute, 10°C/minute and 15°C/minute
- Available in various internal volume of 1000L, 1440L and 2000L
- Custom configurations available

LSP

Programmable Humidity Chamber
- Specifically designed to meet the follow :
. MIL-STD 883, method 1004, 202 and 106 moisture resistance tests
. MIL-STD 810, method 507.2
- Available in 9 cubic feet and 13 cubic feet of internal volume

LSP

Steady State Humidity Chamber
- Temperature Range from -15°C to +93°c
- Humidity Range from 5%  RH to 98% RH
- Available in various internal volumes of 9, 13, 27 and 64 cubic feet

LSP

Ultra Low Humidity Chamber
- Temperature Range from -65°C to +93°C
- Humidity Range from 5% RH to 98% RH
- Available in various internal volumes of 9, 13, 27 and 64 cubic feet

LSP

Continuous High Temperature and High Humidity Chamber
- Temperature Range from 15°C above ambient to +150°C
- Humidity Range: 10% RH to 98% RH
- Available in various internal volumes of 9, 13, 27 and 64 cubic feet